Home > Tig Welding > Plasma Cutter thickness ranges:

Plasma Cutter thickness ranges:

July 27th, 2008

Plasma Cutting machinery can use two mechanized and manual tasks typically have a lower rating for cutting thick mechanized rather than manual. This is for any reason.

Initial and end the cut on resources close to the maximum thickness properly needs a method of the operator is simple for a human operator, but difficult or impossible to program in a machine. Therefore, a lower score for acceptable cuts.

mechanized plasma cutting needs a strong in many cases, rather than warnings. A machine can not successfully enter generally as thick as it can cut.

customers using The plasma cutting equipment in an automated set up normally find the cutting speed on the thickest resources too slow to be satisfactory for the process of mechanization.

Comments are closed.